The Malaysia Linux Portal Shop - Passive PoE, Power over Ethernet, Ethernet cable, Passive PoE Injector, Passive

Passive PoE - Power over Ethernet

Power over Ethernet is a simple way of providing power for an access point on the roof. Passive PoE uses free wires in the Ethernet cable and sends the equipments power along them to the far end. Over a short distance, its usually possible to use the power adapter supplied as standard with the access point or with other network elements which we wish to connect along the Ethernet cable. If the loss of the voltage on the wiring along longer lengths of Ethernet cable is too high, its possible to use another more powerful power adapter, to eliminate this loss of voltage.

Passive Power over Ethernet - SET

The complete Passive Power over Ethernet - SET contains two pieces INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet - SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet - SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).

Prices Weight Volume (approximate)

Passive Power over Ethernet - SET 1 0.3 kg/0.66 lb 0.00054 m3/ 0.1 cu.ft

Passive Power over Ethernet - SET 100 100 7 kg/15.47 lb 0.038 m3/ 1.34 cu.f

Passive Power over Ethernet - SET 1000 1000 61 kg/134.81 lb 0.167 m3/5.89 cu.f

Passive Power over Ethernet - Injector

The Passive PoE - Injector is a lower part (computer end) which enables to merge the power supply and data to one ethernet cable and supply the devices with PoE port. It is suitable for connecting the devices which actively support Passive PoE such as Wiligear, LigoWave, Mikrotik-routerboard, WRAP, ALIX etc. They can be supplied standardly up to 50 V (the power adapter is not included). Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).

Prices Weight Volume (approximate)

Passive Power over Ethernet - Injector 1 0.3 kg / 0.66 lb 0.00054 m3 / 0.1 cu.ft

Passive Power over Ethernet - Injector 100 100 4 kg / 8.84 lb 0.0132 m3 / 0.46 cu.f

Passive Power over Ethernet - Injector 1000 1000 31 kg / 68.51 lb 0.086 m3 / 3.03 cu.f

Ask a question about this product...

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

This product was added to our catalog on Friday 06 March, 2009.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Currently viewing: The Malaysia Linux Portal Shop - Passive PoE, Power over Ethernet, Ethernet cable, Passive PoE Injector, Passive